Melodyne 5 essential – Quick Start

  • Melodyne essential in Pro Tools 2020.11Are you already familiar with Pro Tools but new to Melodyne? Then this is the video for you!

Melodyne 5 essential is a full version of Melodyne offering you the most important Melodyne functions for the editing of vocal and instrument tracks.

Melodyne 5 essential gives you direct access to individual notes within your recordings, allowing you to edit their pitch, position and duration in an intuitive way. The quality of Melodyne’s correction of out-of-tune notes is legendary, but you can also introduce melodic variations, create vocal arrangements, quantize audio, improve timing and do many other things with it as well.

Here is a quick and concise guide to getting Melodyne 5 essential up and running.

Melodyne essential in Pro Tools

For beginners: These videos show you how to get up and running with the Melodyne 5 essential that came bundled with your Pro Tools, as well as how to make optimal use of it in Pro Tools.

  • Melodyne essential in Pro Tools 2020.11 – Are you already familiar with Pro Tools but new to Melodyne? Then this is the video for you!
  • Getting started – In this film, Melodyne pro Rich Crescenti shows how to insert Melodyne in a track and begin using it.
  • Basic navigating and editing – part I – This covers the basics of operating Melodyne and working in the Note Editor.
  • Basic navigating and editing – part II – This video shows you how to select notes and use the macros.
  • Advanced editing – polyphonic editing – Even in Melodyne essential, it’s possible to analyze and edit polyphonic audio.

Integration

You can take advantage of one Melodyne function, Audio-to-MIDI, directly from the Pro Tools user interface. In this case, Melodyne 5 essential converts your audio to MIDI notes in the background.

However to use Melodyne 5 essential’s full function set you must open Melodyne as an AAX plug-in on the audio track you wish to edit, ideally in the first insert slot i.e. ahead of all the other plug-ins in the signal chain – in particular reverb, echo and distortion. Melodyne is most effective when it is given a clean, dry signal.

Melodyne 5 essential is suitable for the editing of lead vocals and monophonic instruments as well as drum and percussion tracks, but you can also edit entire mixes with it – using functions such as transpose, quantize and time-stretch.

When you first insert the plug-in, you will see an empty Melodyne window.

The transfer

All the passages that you wish to edit with Melodyne on the track in question must first be transferred to the Melodyne plug-in. In other words, you must play them through to Melodyne so it can record them, analyze their contents, and display the notes they contain. To do this, proceed as follows:
1. Position the Pro Tools playback cursor at the beginning of the passage you wish to transfer.
2. Click the “Transfer” button in the Melodyne window.
3. Start the playback in Pro Tools.
4. When you reach the end of the passage, either click the Transfer button a second time in Melodyne or stop the playback in Pro Tools.

Repeat the procedure until you have transferred to Melodyne all the passages you wish to edit; whether to transfer one long passage or a number of shorter ones is a matter of personal preference.
As the track plays back, you will hear Melodyne during the passages transferred, and the rest of the time, the original track.

Checking the algorithm

After the transfer, Melodyne’s characteristic blobs will appear in the Melodyne window. These blobs represent the notes found in your recording, which you can select, drag and edit using the tool provided by Melodyne essential. Before you begin, however, there is one thing you must check:

Based on its analysis of the material, Melodyne essential will have chosen to use either its Melodic or its Percussive algorithm. When the Percussive algorithm is used, all the notes are displayed in a single horizontal line; when the Melodic algorithm is used, on the other hand, the vertical position of the notes represents their pitch.

If after the transfer your audio material is not displayed the way you want, you can change the algorithm by selecting ‘Melodic’ or ‘Percussive’, as appropriate, from the Algorithm menu. Please note, however, that if you do this, any editing of the track you may already have done using Melodyne will be lost! That is why, you should always make sure that the correct algorithm has been selected before you begin editing.

Editing

In Melodyne essential, you work exclusively with Melodyne’s Main Tool, which can be used not only to change the pitch of notes but also their position in time and their duration as well as to split them. Larger Melodyne editions offer further tools with which you can alter, among other things, the vibrato, amplitude and formant spectrum of notes as well as their internal timing.

Using the Main Tool, you can edit notes individually or entire selections of notes simultaneously.

To change the pitch of a note:
– Click in the middle of the corresponding blob and drag it up or down. The note will move in steps of a semitone.
– If you hold down the Alt key as you drag, the grid will be deactivated and you will be able to move the note by smaller amounts (in steps of a cent).
– If it’s the right note but simply out of tune (“off key”), double-click on it and it will snap at once to the intended pitch.

To change the position in time of a note:
– Click in the middle of the corresponding blob and drag it to the left or right. When released, the note will snap to the nearest grid line.
– If, however, you hold down the Alt key as you drag, the grid will be deactivated and you will be able to position the note freely.

To change the duration of a note…
…by making it begin earlier or later: Click the left-hand side of the blob and drag it, respectively, to the left or right.
…by making it end earlier or later: Click the right-hand side of the blob and drag it, respectively, to the left or right.
– If you hold down the Alt key as you drag, this will deactivate the grid, allowing you to position the beginning or end of the note freely.

To split a note in two:
– Position the tool at the intended split point – not on but slightly above the blob; the appearance of the mouse pointer will then change, and you will be able to split the note with a double click. This can give you greater flexibility when correcting or reshaping notes.
– The note separation that is created can be removed with a double click to reunite the two segments.

The macros

Whilst the Main Tool is used more to solve specific problems with individual notes, the macros allow you to edit multiple notes and even entire recordings in one go. The macros affect only the notes currently selected, unless none are, in which case they affect all the notes of the passage transferred. There are three macros:

Correct Pitch, which moves notes to, or towards (you decide how far), the nearest semitone. How far they move also depends upon how badly out of tune they were to begin with. With the second slider, you can rein in pitch drift within notes.

Quantize Time moves notes to or towards (you decide how far) either the intended beat or the nearest line of the selected grid.

Note Leveling allows you to make loud notes quieter, or quiet notes louder, or both. In this way, you can smooth out disparities in volume and give your recordings greater homogeneity. It is also the perfect way to optimize input to any compressor behind Melodyne in the signal chain.

What else should I read?

In this tour we have covered only the points needed to get you off to a fast start with Melodyne 5 essential in Pro Tools. But there’s plenty more to discover and to learn. Take a look at the list of topics on the left: In the Help Center, you will find each of these topics explained in detail as well as a wide range of video tutorials. You can access these any time via Melodyne’s Help menu.